{"id":30749,"date":"2024-12-19T12:14:57","date_gmt":"2024-12-19T12:14:57","guid":{"rendered":"https:\/\/dejalex.com\/it\/2024\/12\/eu-design-reform-changes\/"},"modified":"2025-02-13T12:27:42","modified_gmt":"2025-02-13T12:27:42","slug":"riforma-design-europeo-novita","status":"publish","type":"post","link":"https:\/\/www.dejalex.com\/it\/2024\/12\/riforma-design-europeo-novita\/","title":{"rendered":"THE EU DESIGN REFORM HAS ENTERED INTO FORCE. AN OVERVIEW OF THE KEY-CHANGES"},"content":{"rendered":"<p style=\"font-weight: 400;\"><strong>B<\/strong><strong>ackground, objectives and effectiveness of the reform package<\/strong><a href=\"#_ftn1\" name=\"_ftnref1\"><sup>[1]<\/sup><\/a><\/p>\r\n<p style=\"font-weight: 400;\">The pre-existing framework of design law within the European Union is more than twenty years old. It provides a two-layer system of protection, pursuant to:<\/p>\r\n<ul>\r\n<li><strong>Directive 98\/71\/EC <\/strong>of 13 October 1998 on the legal protection of designs (Design Directive), which harmonized the key-provisions of national design laws, and<\/li>\r\n<li><strong>Council Regulation (EC) no. 6\/2002 <\/strong>of 12 December 2001 (Community Design Regulation, CDR), governing a unitary design title within the EU.<\/li>\r\n<\/ul>\r\n<p style=\"font-weight: 400;\">Despite a few attempts, no overall review of this system was put in hand until 2014, when the EU Commission took steps in that direction. Some studies were conducted, from both a legal and an economic perspective, along with stakeholders\u2019 consultations, based on which, in November 2020, a <u>Commission Evaluation<\/u> was published<a href=\"#_ftn2\" name=\"_ftnref2\"><sup>[2]<\/sup><\/a>. What came out was that, on the whole, the system was fit for its purposes and worked quite well, helping to foster innovation in the design field<a href=\"#_ftn3\" name=\"_ftnref3\"><sup>[3]<\/sup><\/a>. However, <u>certain shortcomings<\/u> were identified.<\/p>\r\n<p style=\"font-weight: 400;\">In particular, since the entry into force of the Design Directive and the CDR, <u>technology<\/u> had registered a breakthrough, especially in the <u>digital<\/u> field: new objects and scenarios needed to be covered, and clearly legislated on. Certain <u>procedures<\/u> in relation to design filing, prosecution and claims had become <u>outdated<\/u> and needed to be streamlined; <u>fee<\/u> levels and structure resulted <u>sub-optimal<\/u>, sometimes discouraging individual designers and SMEs from seeking registration or renewal. Furthermore, as to design protection for <u>spare sparts<\/u>, a patchwork of diverging national regimes emerged, resulting in <u>barriers to competition<\/u> in the relevant aftermarket.<\/p>\r\n<p style=\"font-weight: 400;\">So, the legislative process was launched, to revise both the CDR and the Design Directive, with the publication by the Commission of <u>two Proposals<\/u> in November 2022<a href=\"#_ftn4\" name=\"_ftnref4\"><sup>[4]<\/sup><\/a>. In 2023, after in September the Council had adopted its positions (\u201c<em>general approaches<\/em>\u201d), introducing some amendments to the Proposals, in December the co-legislators \u2013 Council and European Parliament \u2013 reached a <u>provisional deal<\/u> on the design package. In 2024, after in March the Parliament had formally endorsed the two drafts (with some amendments), on October 10 the new texts were finally <u>adopted<\/u>, through approval by the Council.<\/p>\r\n<p style=\"font-weight: 400;\">The EU design package (Design Reform) consists of two instruments:<\/p>\r\n<ul>\r\n<li><strong>Directive (EU) 2024\/2823<\/strong> of 23 October 2024 <em>on the legal protection of designs (recast) <\/em>(New Directive)<a href=\"#_ftn5\" name=\"_ftnref5\"><sup>[5]<\/sup><\/a>, and<\/li>\r\n<li><strong>Regulation (EU) 2024\/2822<\/strong> of 23 October 2024 <em>amending Council Regulation (EC) No 6\/2002 on Community designs and repealing Commission Regulation (EC) No 2246\/2002<\/em><a href=\"#_ftn6\" name=\"_ftnref6\"><sup>[6]<\/sup><\/a> (Modifying Regulation)<a href=\"#_ftn7\" name=\"_ftnref7\"><sup>[7]<\/sup><\/a>.<\/li>\r\n<\/ul>\r\n<p style=\"font-weight: 400;\">The Design Reform <u>entered into force<\/u> on <strong>8 December 2024<\/strong>, on the 20<sup>th<\/sup> day following its publication in the Official Journal of the European Union (occurred on 18 November). The <u>Modifying Regulation<\/u> will apply in general from <strong>1 May 2025<\/strong><a href=\"#_ftn8\" name=\"_ftnref8\"><sup>[8]<\/sup><\/a>, while some specific amendments, including those brought about by secondary legislation, will apply as from <strong>1 July 2026<\/strong><a href=\"#_ftn9\" name=\"_ftnref9\"><sup>[9]<\/sup><\/a>.<a href=\"#_ftn10\" name=\"_ftnref10\"><sup>[10]<\/sup><\/a> The <u>New Directive<\/u> will apply after 36 months since its entry into force, namely in <strong>December 2027<\/strong><a href=\"#_ftn11\" name=\"_ftnref11\"><sup>[11]<\/sup><\/a>.<\/p>\r\n<p style=\"font-weight: 400;\">The <strong>objectives<\/strong> of the Design Reform are manifold: <strong>(i)<\/strong> modernizing, clarifying and strengthening design protection; <strong>(ii)<\/strong> making it more accessible and affordable across the EU; <strong>(iii)<\/strong> ensuring enhanced compatibility and interoperability of national systems for design protection in Member States; <strong>(iv)<\/strong> harmonizing national regimes on design protection for repair spare parts, tackling the fragmentation of the relevant market within the EU.<\/p>\r\n<p style=\"font-weight: 400;\">As one reads in the Explanatory Memoranda to the Proposals: \u201c<em>\u2026 Considered together as a package \u2026 the main common objective of this initiative \u2026 is <u>to promote design excellence, innovation and competitiveness<\/u> in the EU. This is to be done by ensuring that the overall design protection system is fit for purpose in the <u>digital age<\/u> and becomes substantially <u>more accessible and efficient<\/u> for individual designers, SMEs and design intensive industries in terms of <u>lower costs and complexity<\/u>, <u>increased speed<\/u>, <u>greater predictability and legal certainty<\/u><\/em> \u2026\u201d<a href=\"#_ftn12\" name=\"_ftnref12\"><sup>[12]<\/sup><\/a>.<\/p>\r\n<p style=\"font-weight: 400;\">Here follows a selection of the main changes that have been introduced to achieve these goals.<\/p>\r\n<p style=\"font-weight: 400;\">\u00a0<\/p>\r\n<p style=\"font-weight: 400;\"><strong>New definitions of \u201c<\/strong><strong><em>design<\/em><\/strong><strong>\u201d and \u201c<\/strong><strong><em>product<\/em><\/strong><strong>\u201d<\/strong><\/p>\r\n<p style=\"font-weight: 400;\">The core definitions of \u201c<em>design<\/em>\u201d and \u201c<em>product<\/em>\u201d are broadened, clarified and updated with respect to technological advances in the digital field.<\/p>\r\n<p style=\"font-weight: 400;\">The definition of design now expressly encompasses \u201c<em>the <u>movement<\/u>, <u>transition<\/u> or any other sort of <u>animation<\/u><\/em>\u201d of traditional features (namely, of \u201c<em>the appearance of the whole or a part of a product resulting from the features, in particular the lines, contours, colours, shape, texture and\/or materials, of the product itself and\/or of its decoration<\/em>\u201d)<a href=\"#_ftn13\" name=\"_ftnref13\"><sup>[13]<\/sup><\/a>.<\/p>\r\n<p style=\"font-weight: 400;\">According to a summary of the Design Reform issued by the European Union Intellectual Property Office (EUIPO), \u201c<em>animation<\/em>\u201d is to be understood as a progressive change of the design feature(s) concerned, with or without retaining their identity; it includes both movement and transition<a href=\"#_ftn14\" name=\"_ftnref14\"><sup>[14]<\/sup><\/a>.<\/p>\r\n<p style=\"font-weight: 400;\">Hence, <strong>dynamic designs<\/strong>, either physical or digital (like the movement of a furniture component or the animation of a computer icon), now clearly fall within the scope of design protection.<\/p>\r\n<p style=\"font-weight: 400;\">Also the definition of \u201c<em>product<\/em>\u201d was reshaped, to expressly include <strong>non-physical items<\/strong>: now product means any industrial or handicraft item, other than a computer program, \u201c<em><u>regardless<\/u><\/em><em> of whether it is embodied in a physical object or materializes in a non-physical form<\/em>\u201d<a href=\"#_ftn15\" name=\"_ftnref15\"><sup>[15]<\/sup><\/a>. Thus, the door is open to completely digital products, such as virtual objects authenticated by NFTs or existing only in the metaverse, or CAD files used to print 3D models.<\/p>\r\n<p style=\"font-weight: 400;\">Besides, the exemplifying list of what can qualify as a product was revised and clarified, now explicitly covering also \u201c<em>sets of articles<\/em>\u201d, \u201c<em>spatial arrangements of items intended to form an interior or exterior environment<\/em>\u201d (e.g. the digital rendering of an interior design project), \u201c<em>graphic<\/em> <em>works<\/em>\u201d, \u201c<em>logos<\/em>\u201d<a href=\"#_ftn16\" name=\"_ftnref16\"><sup>[16]<\/sup><\/a>, \u201c<em>surface patterns<\/em>\u201d and \u201c<em>graphical user interfaces<\/em>\u201d (GUIs).<\/p>\r\n<p style=\"font-weight: 400;\">\u00a0<\/p>\r\n<p style=\"font-weight: 400;\"><strong>Clarifications on the visibility requirement<\/strong><\/p>\r\n<p style=\"font-weight: 400;\">It was clarified that protection is conferred (only) for those features of appearance of a registered design that are <u>shown visibly<\/u> in the application as filed<a href=\"#_ftn17\" name=\"_ftnref17\"><sup>[17]<\/sup><\/a>, and in that way are accessible to the public through consultation of the relevant register\/s.<\/p>\r\n<p style=\"font-weight: 400;\">Conversely, it is immaterial whether the design features are visible or not at any particular time or in any particular situation in the course of product use. An <u>exception<\/u> to this principle applies to <u>component parts of a complex product<\/u>, which (already under the former legislation) are eligible for design protection on condition that, once they are incorporated into the complex product, remain visible during the normal use of the latter (and to the extent that such visible features of the component part fulfil in themselves the requirements of novelty and individual character)<a href=\"#_ftn18\" name=\"_ftnref18\"><sup>[18]<\/sup><\/a>.<\/p>\r\n<p style=\"font-weight: 400;\">As noted by the Max Planck Institute in its Position Statement on the Design Reform<a href=\"#_ftn19\" name=\"_ftnref19\"><sup>[19]<\/sup><\/a>, the EU legislator rectified the product-oriented approach taken by some case law, in particular by the General Court (GC) in its <em>Biscuit Poult <\/em>case<a href=\"#_ftn20\" name=\"_ftnref20\"><sup>[20]<\/sup><\/a>. In that judgment of 2014, concerning a registered Community design intended to be applied to cookies, the GC dismissed the appeal brought by the design holder against the OHIM Third Board of Appeal\u2019s decision of 2012 whereby the Office had found the contested design invalid (on the ground that it lacked individual character).<\/p>\r\n<p style=\"font-weight: 400;\">The Board of Appeal had held that the layer of chocolate filling inside the biscuit could not be taken into consideration for the assessment of the individual character of the design, because it did not remain visible during the normal use of the product. The GC held that the internal layer of chocolate filling became visible only if the cookie was broken, hence, that characteristic did not relate to the appearance of the product. However, the concept of \u201cexternal visibility\u201d is capable of generating legal uncertainty, inasmuch as it does not stick to what is identifiable from the design registration: in this perspective, the clarification provided by the Design Reform should contribute to greater legal certainty.<\/p>\r\n<p style=\"font-weight: 400;\">Besides, as also highlighted in the Max Planck Institute\u2019s Position Statement, this revision meets the expanded definition of \u201c<em>product<\/em>\u201d, in the sense that where digital products are at stake, there is an immanent conflation between design (as appearance) and product itself (as the separable item to which appearance relates). The new regime \u201c<em>now adds graphic works, logos, and graphical user interfaces to the list. In all these instances, the product is indiscernible from its appearance. There is nothing beyond appearance. \u2026 <u>Such products only exist by means of their visual appearance<\/u>. They do not possess any other dimension. We can encounter them only as purely visual signals. Here, <u>preconceived notions of real-life objects <\/u><\/em><em><u>cannot function as a reference point<\/u><\/em><em> to define the object of protection<\/em>.\u201d<a href=\"#_ftn21\" name=\"_ftnref21\"><sup>[21]<\/sup><\/a><\/p>\r\n<p style=\"font-weight: 400;\">\u00a0<\/p>\r\n<p style=\"font-weight: 400;\"><strong>Representation requirements simplified<\/strong><\/p>\r\n<p style=\"font-weight: 400;\">New digital designs require appropriate means to provide a clear and precise visualization in design applications, catching up with technological advances and following common standards across Member States<a href=\"#_ftn22\" name=\"_ftnref22\"><sup>[22]<\/sup><\/a>. With that in mind, the Design Reform made representation requirements more flexible.<\/p>\r\n<p style=\"font-weight: 400;\">The New Directive provides that a design can be represented \u201c<em><u>in any form<\/u><\/em><em> of visual reproduction<\/em>\u201d, which may be \u201c<em>static, <u>dynamic<\/u> or <u>animated<\/u><\/em>\u201d and may be effected \u201c<em>by any appropriate means, using generally available technology<\/em>\u201d, including (in addition to drawings and photographs) also \u201c<em><u>videos<\/u><\/em><em>, <u>computer imaging<\/u> or <u>computer modelling<\/u><\/em>\u201d<a href=\"#_ftn23\" name=\"_ftnref23\"><sup>[23]<\/sup><\/a>.<a href=\"#_ftn24\" name=\"_ftnref24\"><sup>[24]<\/sup><\/a><\/p>\r\n<p style=\"font-weight: 400;\">Consistently with that premise, the New Regulation<a href=\"#_ftn25\" name=\"_ftnref25\"><sup>[25]<\/sup><\/a> foresees that, as to permissible means of representation, the EUIPO Executive Director is supposed to determine the formats and size of electronic files, as well as other relevant technical specifications<a href=\"#_ftn26\" name=\"_ftnref26\"><sup>[26]<\/sup><\/a>.<\/p>\r\n<p style=\"font-weight: 400;\">While designs of animated objects (such as moving icons, cartoon characters and graphical user interfaces) can already be registered under the pre-existing framework, the new means for representing them should help to overcome the limits inherent in those previously envisaged. Suffice it to note that, as to snapshots (short sequences of static views in progression, used to show an animated design at different specific moments in time), the 2024 EUIPO Design Guidelines<a href=\"#_ftn27\" name=\"_ftnref27\"><sup>[27]<\/sup><\/a> specify that &#8220;<em>In principle \u2026 all views of an animated icon or graphical user interface need to be visually related<\/em>\u201d, and that \u201c<em>It is the <u>applicant\u2019s responsibility<\/u> to order the views in such a way as to give a clear perception of the movement \/ progression<\/em>\u201d<a href=\"#_ftn28\" name=\"_ftnref28\"><sup>[28]<\/sup><\/a>. Applicants will now be able to bypass that hurdle when filing a dynamic design.<\/p>\r\n<p style=\"font-weight: 400;\">Still with reference to design representation, both legislative texts address the relevant requirement for design applications, providing that a <u>\u201c<\/u><em><u>sufficiently clear<\/u><\/em><u>\u201d representation<\/u> of the design, such as to permit the subject matter for which protection is sought to be determined, will be enough to obtain a filing date<a href=\"#_ftn29\" name=\"_ftnref29\"><sup>[29]<\/sup><\/a>.<\/p>\r\n<p style=\"font-weight: 400;\">As a further element of flexibility, the <u>cap <\/u>set at maximum seven different <u>views<\/u> of a design that can be contained in an application<a href=\"#_ftn30\" name=\"_ftnref30\"><sup>[30]<\/sup><\/a> is <u>removed<\/u>. Rather, pursuant to the New Directive, the reproduction of a design shows all aspects for which protection is sought \u201c<em>in one or more views<\/em>\u201d, and \u201c<em>other types of views<\/em>\u201d can be provided for the purpose of further detailing specific features of the design<a href=\"#_ftn31\" name=\"_ftnref31\"><sup>[31]<\/sup><\/a>.<a href=\"#_ftn32\" name=\"_ftnref32\"><sup>[32]<\/sup><\/a><\/p>\r\n<p style=\"font-weight: 400;\">\u00a0<\/p>\r\n<p style=\"font-weight: 400;\"><strong>Enhanced rights for design holders against digital infringement<\/strong><\/p>\r\n<p style=\"font-weight: 400;\">One of the findings of the Commission\u2019s assessment was that design protection against infringement rested on an unclear scope, apparently inadequate with respect to certain forms of use or reproduction performed by means of new digital tools, like 3D printing. Fundamentally, through 3D printing a design is encoded in a software and then processed by a computer, in such a way that, starting from a digital file, layers of material are mechanically deposited one on top of the other to obtain a physical 3D reproduction of the design itself.<\/p>\r\n<p style=\"font-weight: 400;\">Under the CDR and the Design Directive, there is no doubt that once the knock-off printout is made, offered and\/or put on the market, an infringement occurs<a href=\"#_ftn33\" name=\"_ftnref33\"><sup>[33]<\/sup><\/a>. However, what if a third party, for example, simply creates and shares a CAD file recording a protected design, when no copy of any product has been printed (yet)? Or what about the mere supply of a software code that can be used to 3D-print an object incorporating the design?<\/p>\r\n<p style=\"font-weight: 400;\">The Design Reform addresses this issue, expanding the list of specific forms of use expressly covered by the exclusive rights conferred to the design holder, including also the rights of \u201c<em><u>creating<\/u><\/em><em>, <u>downloading<\/u>, <u>copying<\/u> and <u>sharing<\/u> or <u>distributing<\/u> to others <u>any medium or software<\/u> which records the design for the purpose of enabling a product \u2026 to be made<\/em>\u201d<a href=\"#_ftn34\" name=\"_ftnref34\"><sup>[34]<\/sup><\/a>.<\/p>\r\n<p style=\"font-weight: 400;\">This amendment should enhance design holders\u2019 enforcement rights against infringers, making them more effective in the digital era. However, some stakeholders called for additional clarification. In particular, the Max Planck Institute in its Position Statement remarked that the new legislation expressly refers the further uses mentioned thereby only to the specific purpose of <em>making a product<\/em>, while a common case of indirect infringement can notably consist of the online sharing of files for <em>display<\/em> in screens of computers or smart devices. \u201c<em>It might be questioned, therefore, whether indirect infringements by way of sharing any medium or software recording the design also fall within this provision (e.g. by way of an analogy) or if there is a legislative intent to leave it out<\/em>.\u201d<a href=\"#_ftn35\" name=\"_ftnref35\"><sup>[35]<\/sup><\/a>.<\/p>\r\n<p style=\"font-weight: 400;\">\u00a0<\/p>\r\n<p style=\"font-weight: 400;\"><strong>The new repair clause<\/strong><\/p>\r\n<p style=\"font-weight: 400;\">The issue of design protection for spare parts has long been <u>controversial<\/u>, as a result of the underlying effort to strike a balance between the need to reward efforts deployed in aesthetic research and that to prevent the monopolization of the secondary market for components necessary to repair a complex product.<\/p>\r\n<p style=\"font-weight: 400;\">The framework outlined by the Design Directive and the CDR reached a transitional compromise, oriented towards <u>increasing liberalization<\/u>. The driver was that, until appropriate amendments to the Design Directive are adopted, Member States can introduce changes to their existing laws on the use of the design of a spare part (namely, of \u201c<em>a component part used for the purpose of the repair of a complex product so as to restore its original appearance<\/em>\u201d) only if the purpose is to liberalize the market for such parts (so-called <em><u>freeze-plus<\/u><\/em><u> clause<\/u>)<a href=\"#_ftn36\" name=\"_ftnref36\"><sup>[36]<\/sup><\/a>. Some Member States introduced a repair clause<a href=\"#_ftn37\" name=\"_ftnref37\"><sup>[37]<\/sup><\/a>, while others did not. As to Community designs, the CDR provides that, until relevant amendments are enacted and enter into force, protection for the design of repair spare parts cannot be claimed<a href=\"#_ftn38\" name=\"_ftnref38\"><sup>[38]<\/sup><\/a>.<\/p>\r\n<p style=\"font-weight: 400;\">The Design Reform tries to shed light on the repair clause and boost it, at the same time harmonizing the relevant regime across Member States. More particularly, also resting on some teachings from EU case law (see, in particular, the <em>Acacia<\/em> judgment<a href=\"#_ftn39\" name=\"_ftnref39\"><sup>[39]<\/sup><\/a>), the new provisions<a href=\"#_ftn40\" name=\"_ftnref40\"><sup>[40]<\/sup><\/a> expressly state that design protection is <u>not<\/u> conferred on a component part which is used for the sole purpose of repairing a complex product so as to restore its original appearance (hence, the <u>repair clause<\/u> applies), provided that:<\/p>\r\n<p style=\"font-weight: 400;\"><strong>(i)<\/strong> the design of the component part is <u>dependent<\/u> upon the appearance of the complex product (so-called <strong><em>must-match<\/em><\/strong><strong>component<\/strong>), and<\/p>\r\n<p style=\"font-weight: 400;\"><strong>(ii)<\/strong> the manufacturer or seller<a href=\"#_ftn41\" name=\"_ftnref41\"><sup>[41]<\/sup><\/a> of the spare part has <u>duly informed consumers<\/u>, through a clear and visible indication on the product or in another appropriate form, about the commercial origin of the product and the identity of the manufacturer, so that they can make an informed choice between competing products that can be used for the repair (<strong>duty of diligence<\/strong>).<\/p>\r\n<p style=\"font-weight: 400;\">On the other hand, <strong>(iii)<\/strong> it is specified that manufacturers and sellers of spare parts are <u>not required to guarantee<\/u> that the component parts they make or sell are ultimately used by end users only for repair purposes.<\/p>\r\n<p style=\"font-weight: 400;\">Member States will have a transitional period of eight years to implement the new repair clause in their national systems<a href=\"#_ftn42\" name=\"_ftnref42\"><sup>[42]<\/sup><\/a>.<\/p>\r\n<p style=\"font-weight: 400;\">Point <strong>(i)<\/strong> above addresses the key-distinction between <em>must-fit<\/em> and <em>must-match <\/em>components. The former (<em><u>must-fit<\/u><\/em><u> components<\/u>) are to some extent interchangeable, because their outline and dimensions only partially depend on the need to be inserted or assembled into a complex product: e.g. the wheel rims or rear-views mirrors of a vehicle. The latter (<em><u>must-match<\/u><\/em><u> components<\/u>) need, instead, to exactly reproduce the shape of the original component in order to be inserted or assembled with other components into the complex product: e.g. parts of the car bodywork, like a door or the bonnet.<\/p>\r\n<p style=\"font-weight: 400;\">In this respect, the EU legislator seems to depart somewhat from the <em>Acacia<\/em> judgment (which concerned car wheel rims), whereby, under the repair clause contained in the CDR, the exclusion from protection as a Community design was not subject to the requirement that the design of the repair spare part was dependent upon the appearance of the complex product. However, in the same judgment, the CJEU found that the repair clause could apply on condition that the replacement part showed an identical visual appearance to that of the component which was originally incorporated into the complex product when placed on the market<a href=\"#_ftn43\" name=\"_ftnref43\"><sup>[43]<\/sup><\/a>.<\/p>\r\n<p style=\"font-weight: 400;\">The clarification supplied by the Design Reform ought to prove good news for design holders, inasmuch as the applicability of the new repair clause is limited to shape-dependent spare parts.<\/p>\r\n<p style=\"font-weight: 400;\">Points <strong>(ii) <\/strong>and <strong>(iii)<\/strong> reflect at large the findings of <em>Acacia<\/em>, despite certain variations. The CJEU held that, \u201c\u2026 <em>while the manufacturer or seller of a component part of a complex product <u>cannot be expected to guarantee, objectively and in all circumstances<\/u>, that the parts they make or sell for use in accordance with the conditions prescribed \u2026 are, ultimately, actually used by end users in compliance with those conditions<\/em> \u2026\u201d, in order to rely on the repair clause they are under a duty of diligence as regards <u>compliance by downstream users<\/u> with the conditions laid down in that clause<a href=\"#_ftn44\" name=\"_ftnref44\"><sup>[44]<\/sup><\/a>.<\/p>\r\n<p style=\"font-weight: 400;\">\u201c\u2026 <em>In particular, they must, first of all, <u>inform<\/u> the downstream user, through a clear and visible indication on the product, on its packaging, in the catalogues or in the sales documents, on the one hand, that the component part concerned incorporates a design of which they are not the holder and, on the other, that the part is intended exclusively to be used for the purpose of the repair of the complex product so as to restore its original appearance. <\/em><\/p>\r\n<p style=\"font-weight: 400;\"><em>Next, they must, through appropriate means, in particular <u>contractual means<\/u>, ensure that downstream users do not intend to use the component parts at issue in a way that does not comply with the conditions prescribed \u2026<\/em><\/p>\r\n<p style=\"font-weight: 400;\"><em>Finally, the manufacturer or seller <u>must refrain<\/u> from selling such a component part where they know or, in the light of all the relevant circumstances, <u>ought reasonably to know<\/u> that the part in question will not be used in accordance with the conditions laid down<\/em> \u2026\u201d<a href=\"#_ftn45\" name=\"_ftnref45\"><sup>[45]<\/sup><\/a>.<\/p>\r\n<p style=\"font-weight: 400;\">It is noted that the two latter requirements \u2013 to adopt appropriate \/ contractual means and to refrain from selling in case of non-compliance by end users \u2013 are not specifically mentioned in the new repair clause. This may be at the source of some uncertainty in applying the new legislation, which would be left to court interpretation.<\/p>\r\n<p style=\"font-weight: 400;\">As regards the <u>informative requirement<\/u> towards downstream users, the wording adopted in the New Regulation and New Directive expressly refers to the commercial origin of the product and the identity of the spare part manufacturer. On the other hand, some uncertainties may arise in practice as to where an \u201c<em>appropriate form<\/em>\u201d of giving the information (other than a clear and visible indication on the product) subsists. As a whole, as the Max Planck Institute noted, \u201c\u2026 <em>by stipulating that the limitations cannot be invoked if the manufacturer or seller failed to duly inform the consumers about the origin of the product, the <\/em>\u2026 [new] <em>repair clause effectively rebuts the argument brought forth by opponents of the repair clause that consumers might be exposed to risks that they are not aware of when buying a non-original part<\/em>. \u2026\u201d<a href=\"#_ftn46\" name=\"_ftnref46\"><sup>[46]<\/sup><\/a>.<a href=\"#_ftn47\" name=\"_ftnref47\"><sup>[47]<\/sup><\/a><\/p>\r\n<p style=\"font-weight: 400;\">\u00a0<\/p>\r\n<p style=\"font-weight: 400;\"><strong>Fee adjustments<\/strong><\/p>\r\n<p style=\"font-weight: 400;\">Structure and levels of fees payable to the EUIPO are rearranged. The new scheme is set out directly in the New Regulation (while Regulation (EC) no. 2246\/2002 is repealed<a href=\"#_ftn48\" name=\"_ftnref48\"><sup>[48]<\/sup><\/a>).<\/p>\r\n<p style=\"font-weight: 400;\">Looking at the new fee amounts provided by the Annex to the New Regulation, one sees that registration and publication fees are unified into a <u>single application fee<\/u> (of 350 EUR). In case of <u>multiple application<\/u>, a <u>flat fee<\/u> (equal to 125 EUR) per additional design is introduced, eliminating bulk discounts based on the number of designs applied for. On the other hand, <u>renewal fees are increased<\/u>(e.g. that for the 4<sup>th<\/sup> renewal rises from 180 to 700 EUR)<a href=\"#_ftn49\" name=\"_ftnref49\"><sup>[49]<\/sup><\/a>.<\/p>\r\n<p style=\"font-weight: 400;\">The underlying aim is to make design registration more accessible, but at the same time to discourage maintenance of unused or less worthy designs and to reflect the greater value of EU design registration compared to the national ones.<\/p>\r\n<p style=\"font-weight: 400;\">\u00a0<\/p>\r\n<p style=\"font-weight: 400;\"><strong>Procedural improvements<\/strong><\/p>\r\n<p style=\"font-weight: 400;\">Besides fee adjustments, the EU legislator took certain measures to <u>update, simplify and speed up procedures<\/u>, as well as enhance legal certainty and predictability<a href=\"#_ftn50\" name=\"_ftnref50\"><sup>[50]<\/sup><\/a>. This driver is appropriately summarized through the slogan \u201c<em>easier, cheaper and faster<\/em>\u201d<a href=\"#_ftn51\" name=\"_ftnref51\"><sup>[51]<\/sup><\/a>. As to Member States, it was considered that the procedure for national design registration should be efficient and transparent, and follow rules similar to those applicable to EU designs<a href=\"#_ftn52\" name=\"_ftnref52\"><sup>[52]<\/sup><\/a>.<\/p>\r\n<p style=\"font-weight: 400;\">Among the most significant procedural improvements, the following are worth mentioning.<\/p>\r\n<ul>\r\n<li>The possibility to <u>amend<\/u> the design <u>application<\/u> and <u>alter<\/u> the design <u>registration<\/u> in <u>immaterial details<\/u><a href=\"#_ftn53\" name=\"_ftnref53\"><sup>[53]<\/sup><\/a> is introduced. In interpreting the concept of \u201c<em>immaterial details<\/em>\u201d a potential risk of legal uncertainty cannot, though, be ruled out.<\/li>\r\n<li>The <u>\u201c<\/u><em><u>unity of class<\/u><\/em><u>\u201d requirement<\/u> for multiple applications is <u>abolished<\/u>. More particularly, the possibility to combine several designs in a one-shot multiple application for registration is no longer subject to the condition that the products concerned all belong to the same class of the Locarno Classification<a href=\"#_ftn54\" name=\"_ftnref54\"><sup>[54]<\/sup><\/a>. This change relieves applicants from the burden of filing more applications in the event of simultaneous launch of non-homogeneous products \/ product features.<\/li>\r\n<\/ul>\r\n<p><span style=\"font-weight: 400;\">Member States are now expressly allowed to provide for an <u>administrative procedure<\/u> before their IP offices for the declaration of <u>invalidity<\/u> of registered national designs, which should be substantially aligned to that applicable before the EUIPO to registered EU designs, and can be resorted to without prejudice to the parties\u2019 right to turn to courts<\/span><a style=\"font-weight: 400;\" href=\"#_ftn55\" name=\"_ftnref55\"><sup>[55]<\/sup><\/a><span style=\"font-weight: 400;\">.<\/span><\/p>\r\n<p class=\"has-text-align-center\" style=\"text-align: center;\"><a href=\"https:\/\/dejalex.com\/it\/wp-content\/uploads\/2025\/02\/Articolo_The-EU-design-reform.pdf\" target=\"_blank\" rel=\"noreferrer noopener\"><i  class=\"x-icon x-icon-download\" data-x-icon-s=\"&#xf019;\" aria-hidden=\"true\"><\/i> Scarica l&#8217;articolo<\/a><\/p>\r\n<p class=\"has-text-align-center\" style=\"text-align: center;\"><!-- \/wp:post-content -->\r\n\r\n<!-- wp:separator {\"className\":\"is-style-wide\"} --><\/p>\r\n<hr class=\"wp-block-separator is-style-wide\" \/>\r\n<p class=\"has-text-align-center\" style=\"text-align: center;\"><!-- \/wp:separator -->\r\n\r\n<!-- wp:paragraph {\"style\":{\"typography\":{\"fontSize\":10}}} --><\/p>\r\n<div style=\"font-size: 10px;\">\r\n<p id=\"_ftn1\">[1] Relevant information and documentation is available, among others, in webpages of the European Parliament\u2019s Legislative Train Schedule (<a href=\"https:\/\/www.europarl.europa.eu\/legislative-train\/theme-legal-affairs-juri\/file-revision-of-the-design-directive-and-of-the-community-design-regulation\">LINK<\/a>) and the EUIPO website (<a href=\"https:\/\/www.euipo.europa.eu\/en\/designs\/design-reform-hub\">LINK<\/a>).<\/p>\r\n<p id=\"_ftn2\">[2] The full text of the Commission\u2019s Evaluation of EU legislation on design protection, along with further information, is available at this <a href=\"https:\/\/ec.europa.eu\/info\/law\/better-regulation\/have-your-say\/initiatives\/1846-Evaluation-of-EU-legislation-on-design-protection_en\">LINK<\/a>.<\/p>\r\n<p id=\"_ftn3\">[3] \u201c<em>The evaluation showed that the objectives pursued by the EU\u2019s design legislation continue to be highly relevant. This was shown in the <u>substantial contribution made by design-intensive industries to the EU\u2019s<\/u><\/em><u> <em>economy<\/em><\/u><em> and in the <u>growing value of new technological designs<\/u> for EU innovation. The <u>steady increase in the number of design applications<\/u> filed with the EUIPO proves both the success of the Community design system and the rising importance companies give to protecting their designs<\/em>.\u201d: see Executive Summary of the Evaluation &#8211; SWD (2020) 265 (document available at this <a href=\"https:\/\/ec.europa.eu\/info\/law\/better-regulation\/have-your-say\/initiatives\/1846-Evaluation-of-EU-legislation-on-design-protection_en\">LINK<\/a>).<\/p>\r\n<p id=\"_ftn4\">[4] References to the Proposals: COM(2022) 666 and COM(2022) 667.<\/p>\r\n<p id=\"_ftn5\">[5] Full text of the New Directive available at this <a href=\"https:\/\/eur-lex.europa.eu\/legal-content\/EN\/TXT\/?uri=OJ:L_202402823\">LINK<\/a>.<\/p>\r\n<p id=\"_ftn6\">[6] Commission Regulation (EC) no. 2246\/2002 of 16 December 2002 on fees payable to the EUIPO for registration of Community designs (<em>\u201con the fees payable to the Office for Harmonization in the Internal Market \u2026 in respect of the registration of Community designs\u201d<\/em>). Pursuant to art. 2 of the Modifying Regulation, Regulation (EC) no. 2246\/2002 is repealed with effect from 1 May 2025.<\/p>\r\n<p id=\"_ftn7\">[7] Full text of the Modifying Regulation available at this <a href=\"https:\/\/eur-lex.europa.eu\/legal-content\/EN\/TXT\/?uri=OJ:L_202402822\">LINK<\/a>. Throughout this article, \u201c<em>Modifying Regulation<\/em>\u201d refers to Regulation (EU) 2024\/2822 itself, while \u201c<em>New Regulation<\/em>\u201d means the new text of Regulation (CE) no. 6\/2002 as amended pursuant to art. 1 of the Modifying Regulation.<\/p>\r\n<p id=\"_ftn8\">[8] Namely, the first day of the month following 4 months after the date of entry into force.<\/p>\r\n<p id=\"_ftn9\">[9] Namely, the first day of the month following 18 months after the date of entry into force<\/p>\r\n<p id=\"_ftn10\">[10] See art. 3 of the Modifying Regulation.<\/p>\r\n<p id=\"_ftn11\">[11] More precisely, art. 38 of the New Directive reads that articles 4, 5, 7, 8, 9, 20 and 22 thereof will apply from 9 December 2027.<\/p>\r\n<p id=\"_ftn12\">[12] See Explanatory Memorandum to COM(2022) 666 (<a href=\"https:\/\/eur-lex.europa.eu\/legal-content\/EN\/TXT\/HTML\/?uri=CELEX:52022PC0666\">LINK<\/a>) and Explanatory Memorandum on COM(2022) 667 (<a href=\"https:\/\/eur-lex.europa.eu\/legal-content\/EN\/TXT\/HTML\/?uri=CELEX:52022PC0667\">LINK<\/a>).<\/p>\r\n<p id=\"_ftn13\">[13] See art. 3.1 New Regulation and art. 2.3 New Directive.<\/p>\r\n<p id=\"_ftn14\">[14] See EUIPO document entitled \u201c<em>EU Designs Legislative Reform<\/em>\u201d, page 5, available at this <a href=\"https:\/\/euipo.europa.eu\/tunnel-web\/secure\/webdav\/guest\/document_library\/contentPdfs\/designs\/design_legal_reform\/Summary%20Designs%20LR_I%20Phase.FINAL_EN.pdf\">LINK<\/a>.<\/p>\r\n<p id=\"_ftn15\">[15] See art. 3.2 New Regulation and art. 2.4 New Directive.<\/p>\r\n<p id=\"_ftn16\">[16] According to some IP experts, there is a risk that the express inclusion of logos among products eligible for protection as designs may interfere with trademark legislation, causing some systemic inconsistencies: see LES Italy,<em> Revisione delle norme dell&#8217;UE in materia di disegni e modelli industriali<\/em>, 31.01.2023, available at this <a href=\"https:\/\/ec.europa.eu\/info\/law\/better-regulation\/have-your-say\/initiatives\/12610-Proprieta-intellettuale-revisione-delle-norme-dellUE-in-materia-di-disegni-e-modelli-industriali-regolamento-sui-disegni-e-modelli-\/F3377884_it\">LINK<\/a>.<\/p>\r\n<p id=\"_ftn17\">[17] See art. 18a New Regulation and art. 15 New Directive.<\/p>\r\n<p id=\"_ftn18\">[18] See art. 4.2 New Regulation and art. 3.3 New Directive.<\/p>\r\n<p id=\"_ftn19\">[19] See \u201c<em>Position Statement of the Max Planck Institute for Innovation and Competition of 23 January 2023 on the \u2018Design Package\u2019 (Amendment of the Design Regulation and Recast of the Design Directive)<\/em>\u201d, available at this <a href=\"https:\/\/www.ip.mpg.de\/en\/research\/research-news\/position-statement-on-the-design-package.html\">LINK<\/a>.<\/p>\r\n<p id=\"_ftn20\">[20] General Court, 09.09.2014, T-494\/12, <em>Biscuits Poult SAS<\/em> <em>vs. OHIM<\/em>.<\/p>\r\n<p id=\"_ftn21\">[21] See point III.1 of the Max Planck Institute\u2019s Position Statement.<\/p>\r\n<p id=\"_ftn22\">[22] See recital 24 Modifying Regulation and recital 39 New Directive.<\/p>\r\n<p id=\"_ftn23\">[23] See art. 26.1 New Directive.<\/p>\r\n<p id=\"_ftn24\">[24] Pursuant to art. 26.6 of the New Directive, \u201c<em>The Member States\u2019 central industrial property offices and the Benelux Office for Intellectual Property shall cooperate with each other and with the European Union Intellectual Property Office to establish <u>common standards<\/u> to be applied to the requirements and means of design representation, in particular as regards \u2026 the <u>technical specifications<\/u> for the <u>means to be used<\/u> for the reproduction, storage and filing of designs, such as the formats and size of the relevant electronic files<\/em>.\u201d.<\/p>\r\n<p id=\"_ftn25\">[25] \u201cNew Regulation\u201d as defined in footnote 7.<\/p>\r\n<p id=\"_ftn26\">[26] See art. 36.5 New Regulation.<\/p>\r\n<p id=\"_ftn27\">[27] EUIPO Design Guidelines, Version 1.0, entered into force on 31.03.2024. Full text available in the EUIPO website at this <a href=\"https:\/\/guidelines.euipo.europa.eu\/2213908\/2199801\/designs-guidelines\/1-introduction\">LINK<\/a>.<\/p>\r\n<p id=\"_ftn28\">[28] See 2024 EUIPO Design Guidelines, Introduction, point 5.3.6.<\/p>\r\n<p id=\"_ftn29\">[29] See art. 36.1(c) New Regulation and art. 25.1(c) New Directive.<\/p>\r\n<p id=\"_ftn30\">[30] Pursuant to art. 4.2 of the Community Design Implementing Regulation (CDIR &#8211; Commission Regulation (EC) no. 2245\/2002 of 21 October 2002), \u201c<em>The representation may contain no more than seven different views of the design. \u2026 In cases where more than seven views are provided, the Office may disregard for registration and publication any of the extra views. \u2026<\/em>\u201d.<\/p>\r\n<p id=\"_ftn31\">[31] See art. 26.2 New Directive.<\/p>\r\n<p id=\"_ftn32\">[32] Pursuant to art. 26.6 of the New Directive, the cooperation among IP offices to establish common standards will also have to address the types and number of views to be used for design representation. As to filing an EU design represented by static views, pursuant to art. 36.5 of the New Regulation it is up to the EUIPO Executive Director to determine, among others, the manner of numbering different views.<\/p>\r\n<p id=\"_ftn33\">[33] Pursuant to art. 19.1 of the CDR and art. 12.1 of the Design Directive, a registered design \u201c<em>shall confer on its holder the exclusive right to use it and to prevent any third party not having his consent from using it. The aforementioned use shall cover, in particular, the making, offering, putting on the market, importing, exporting or using of a product in which the design is incorporated or to which it is applied, or stocking such a product for those purposes<\/em>\u201d.<\/p>\r\n<p id=\"_ftn34\">[34] See art. 19.1(d) New Regulation and art. 16.2(d) New Directive.<\/p>\r\n<p id=\"_ftn35\">[35] See point III.4(a) of the Max Planck Institute\u2019s Position Statement.<\/p>\r\n<p id=\"_ftn36\">[36] See art. 14 of the Design Directive.<\/p>\r\n<p id=\"_ftn37\">[37] In Italy, the Industrial Property Code (Legislative Decree no. 30\/2005 &#8211; IPC) does contain a repair clause: pursuant to art. 241 IPC, until the Design Directive is modified, exclusive rights to the components of a complex product <u>cannot<\/u> be invoked to prevent the manufacturing and sale of such components for the purpose of repairing the complex product in order to restore its original appearance.<\/p>\r\n<p id=\"_ftn38\">[38] See art. 110 CDR.<\/p>\r\n<p id=\"_ftn39\">[39] CJEU, 20.12.2017, C-397\/16 and C-435\/16, <em>Acacia<\/em> judgment.<\/p>\r\n<p id=\"_ftn40\">[40] See art. 20a New Regulation and art. 19 New Directive.<\/p>\r\n<p id=\"_ftn41\">[41] One might wonder whether other market players, such as service providers, should be allowed to invoke the repair clause.<\/p>\r\n<p id=\"_ftn42\">[42] \u201c<em>Where on 8 December 2024, the national law of a Member State provides protection for designs \u2026, the Member State shall \u2026 continue until 9 December 2032 to provide that protection for designs for which registration has been applied for before 8 December 2024<\/em>\u201d (para. 4 of art. 19 New Directive).<\/p>\r\n<p id=\"_ftn43\">[43] See points 1 and 2 of CJEU judgment, in C-397\/16 and C-435\/16.<\/p>\r\n<p id=\"_ftn44\">[44] See para. 85 and 89 <em>Acacia<\/em> judgment, and point 3 in the ruling thereof.<\/p>\r\n<p id=\"_ftn45\">[45] See points 86, 87 and 88 <em>Acacia<\/em> judgment.<\/p>\r\n<p id=\"_ftn46\">[46] See point III.5(b) of the Max Planck Institute\u2019s Position Statement.<\/p>\r\n<p id=\"_ftn47\">[47] Room for debate can concern issues of coordination, and possibly tension, between design law and other branches of IP law which do not contemplate the repair clause. As to trademark law, case law provided guidance in <em>Audi<\/em> (CJEU, 25.01.2024, C-334\/22). The case concerned a radiator grille for a motor vehicle which contained an element intended for the attachment of the well-known AUDI rings, protected as a trademark; the shape of such element was identical\/similar to the emblem\/trademark. The Court held that Regulation on the EU Trademark (Regulation (EU) 2017\/1001, EUTMR) \u201c\u2026 <em>must be interpreted as meaning that it <u>does not preclude<\/u> the manufacturer of motor vehicles which is the proprietor of an EU trade mark from prohibiting a third party from using a sign identical with, or similar to, that trade mark in relation to <u>spare parts<\/u> for those motor vehicles, namely radiator grilles, where that <u>sign consists of the shape of an element<\/u> of the radiator grille designed for the attachment thereto of the emblem representing that trade mark, regardless of whether or not there is a technical possibility of attaching that emblem to the radiator grille without affixing that sign to it<\/em> \u2026\u201d (point 2). In this sense, the repair clause is not applicable to trademark law.<\/p>\r\n<p id=\"_ftn48\">[48] See footnote 6.<\/p>\r\n<p id=\"_ftn49\">[49] Furthermore, some specific fees (among others, those for late payment of registration\/publication fees and for registering the transfer of a registered Community design) are eliminated, while fees of applications for a declaration of invalidity and appeal are reduced. More details on fee adjustments are included in this summary provided by the EUIPO: <a href=\"https:\/\/euipo.europa.eu\/tunnel-web\/secure\/webdav\/guest\/document_library\/contentPdfs\/designs\/design_legal_reform\/Summary%20Designs%20LR_I%20Phase.FINAL_EN.pdf\">LINK<\/a>.<\/p>\r\n<p id=\"_ftn50\">[50] See recital 23 of the Modifying Regulation.<\/p>\r\n<p id=\"_ftn51\">[51] See quotation in this press release from the Council of the EU, dated 05.12.2023: <a href=\"https:\/\/www.consilium.europa.eu\/en\/press\/press-releases\/2023\/12\/05\/council-and-parliament-strike-provisional-deal-on-design-protection-package\/\">LINK<\/a>.<\/p>\r\n<p id=\"_ftn52\">[52] See recital 38 of the New Directive.<\/p>\r\n<p id=\"_ftn53\">[53] See art. 47a.2 and art. 50e of the New Regulation.<\/p>\r\n<p id=\"_ftn54\">[54] See art. 27 New Directive and art. 37 New Regulation. Under art. 37 of the New Regulation, the number of designs that can be filed in a multiple application is capped at a maximum of 50 (this should avoid too wide applications).<\/p>\r\n<p id=\"_ftn55\">[55] See art. 31 and recital 43 of the New Directive.<\/p>\r\n<\/div>","protected":false},"excerpt":{"rendered":"<p>[x_icon type=\"tag\"] Propriet\u00e0 Intellettuale<\/p>\n","protected":false},"author":3,"featured_media":17673,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"inline_featured_image":false,"footnotes":""},"categories":[403,341,422],"tags":[],"class_list":["post-30749","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-giulia-beneduci-it","category-proprieta-intellettuale","category-pubblicazioni"],"_links":{"self":[{"href":"https:\/\/www.dejalex.com\/it\/wp-json\/wp\/v2\/posts\/30749","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.dejalex.com\/it\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.dejalex.com\/it\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.dejalex.com\/it\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/www.dejalex.com\/it\/wp-json\/wp\/v2\/comments?post=30749"}],"version-history":[{"count":3,"href":"https:\/\/www.dejalex.com\/it\/wp-json\/wp\/v2\/posts\/30749\/revisions"}],"predecessor-version":[{"id":30752,"href":"https:\/\/www.dejalex.com\/it\/wp-json\/wp\/v2\/posts\/30749\/revisions\/30752"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.dejalex.com\/it\/wp-json\/wp\/v2\/media\/17673"}],"wp:attachment":[{"href":"https:\/\/www.dejalex.com\/it\/wp-json\/wp\/v2\/media?parent=30749"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.dejalex.com\/it\/wp-json\/wp\/v2\/categories?post=30749"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.dejalex.com\/it\/wp-json\/wp\/v2\/tags?post=30749"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}